Custom-designed, mass silk production in genetically engineered silkworms.

Genetically engineered silkworms have been widely used to obtain silk with modified characteristics especially by introducing spider silk genes. However, these attempts are still challenging due to limitations in transformation strategies and difficulties in integration of the large DNA fragments. Here, we describe three different transformation strategies in genetically engineered silkworms, including transcription-activator-like effector nuclease (TALEN)-mediated fibroin light chain (FibL) fusion (BmFibL-F), TALEN-mediated FibH replacement (BmFibH-R), and transposon-mediated genetic transformation with the silk gland-specific fibroin heavy chain (FibH) promoter (BmFibH-T). As the result, the yields of exogenous silk proteins, a 160 kDa major ampullate spidroin 2 (MaSp2) from the orb-weaving spider Nephila clavipes and a 226 kDa fibroin heavy chain protein (EvFibH) from the bagworm Eumeta variegate, reach 51.02 and 64.13% in BmFibH-R transformed cocoon shells, respectively. Moreover, the presence of MaSp2 or EvFibH significantly enhances the toughness of genetically engineered silk fibers by ∼86% in BmFibH-T and ∼80% in BmFibH-R silkworms, respectively. Structural analysis reveals a substantial ∼40% increase in fiber crystallinity, primarily attributed to the presence of unique polyalanines in the repetitive sequences of MaSp2 or EvFibH. In addition, RNA-seq analysis reveals that BmFibH-R system only causes minor impact on the expression of endogenous genes. Our study thus provides insights into developing custom-designed silk production using the genetically engineered silkworm as the bioreactor.

Gender Differences in the Prevalence and Clinical Correlates of Metabolic Syndrome in First-Episode and Drug-Naïve Patients With Major Depressive Disorder.

OBJECTIVE: Major depressive disorder (MDD) is a severe psychiatric symptom worldwide, and the coexistence of MDD with metabolic syndrome (MetS) is common in clinical practice. However, gender differences in comorbid MetS in first-episode and drug-naïve (FEDN) MDD patients have not been reported. Here, we explored potential gender differences in the prevalence and clinical correlates of comorbid MetS in FEDN MDD patients. METHODS: A cross-sectional study of 1718 FEDN MDD patients was conducted. Demographic and clinical data were collected. The Hamilton Depression Scale (HAMD), Hamilton Anxiety Scale, and Positive and Negative Syndrome Scale positive subscale were used to evaluate depression, anxiety, and psychotic symptoms, respectively. RESULTS: The prevalence of MetS was 1.645-fold higher in female MDD patients (38.50%) than in male patients (26.53%). Patients with MetS had higher HAMD score, Hamilton Anxiety Scale score, and Positive and Negative Syndrome Scale positive subscale score than patients without MetS (p values < .001). Furthermore, suicide attempts (male: odds ratio [OR] = 1.706, p = .034; female: OR = 1.639, p = .004) and HAMD score (male: OR = 1.251, p < .001; female: OR = 1.148, p < .001) were independently associated with MetS in male and female patients, whereas age of onset was independently associated with MetS only in female patients (OR = 1.744, p = .047). CONCLUSIONS: Our findings suggest significant gender differences in the prevalence and clinical correlates of comorbid MetS in FEDN MDD patients. Clinical variables (suicide attempts and HAMD scores) may be independently associated with MetS in MDD patients.

Large-Scale, Vertically Aligned 2D Subnanochannel Arrays by a Smectic Liquid Crystal Network for High-Performance Osmotic Energy Conversion.

The osmotic energy, an abundant renewable energy source, can be directly converted to electricity by nanofluidic devices with ion-selective membranes. 2D nanochannels constructed by nanosheets possess abundant lateral interfacial ion-exchange sites and exhibit great superiority in nanofluidic devices. However, the most accessible orientation of the 2D nanochannels is parallel to the membrane surface, undoubtedly resulting in the conductivity loss. Herein, first vertically aligned 2D subnanochannel arrays self-assembled by a smectic liquid crystal (LC) network that exhibit high-performance osmotic energy conversion are demonstrated. The 2D subnanochannel arrays are fabricated by in situ photopolymerization of monomers in the LC phase. The as-prepared membrane exhibits excellent water-resistance and mechanical strength. The 2D subnanochannels with excellent cation selectivity and conductivity show high-performance osmotic energy conversion. The power density reaches up to about 22.5 W m-2 with NaCl solution under a 50-fold concentration gradient, which is among with ultrahigh power density. This membrane design concept provides promising applications in osmotic energy conversion.

Biodegradable photo-crosslinked polycaprolactone/polydopamine elastomers with excellent light driven programmable shape memory and chemical degradation properties.

Fabrication of biodegradable shape memory polymer with remotely controllable shape actuation is of great significance in the biomedical field but remains challenging. Herein, we present a simple strategy to fabricate a monolayer-based stretchable and mechanically robust polycaprolactone/polydopamine elastomer via efficient thiol-ene click chemistry. The resultant elastomers exhibit desirable photothermal transfer efficiency and can enable rapid temperature increase over the melting temperature of polymeric matrix, and quantitative results demonstrate that the crosslinked film exhibited excellent shape memory properties with shape fixity (Rf) and shape recovery ratios (Rr) approaching 92.3 % and 95.6 %, respectively. Combined with photo stimuli, anisotropic polymer chain relaxation of the prestretched film can generate asymmetric contractions and eventually give rise to ut out-of-plane bending actuations upon photo stimulation, meanwhile, numerical simulation reveals the interaction mechanism of light with film. Beyond this, we further demonstrate that the bending angle is correlated with the parameters of prestretch strain, film thickness as well as irradiation time, and the maximum value can reach 158° with prestretch strain of 200 % and film thickness of 0.3 mm. In particular, the bent structures could be reversibly deformed into plane state via photo-directed corresponding opposite surfaces. Remarkably, the in vitro degradation properties of the elastomers on PBS-T buffer solutions demonstrated that the degradation was composed of induction stage and acceleration stage. This work will pave way for designing biodegradable light-induced shape memory materials toward biomedical device fields and so on.

Super-Wide Temperature Lasers Spanning from -180 to 240 °C Based on Fully-Polymerized Blue Phase Superstructures.

Blue phase liquid crystal (BPLC) lasers have potential applications in displays, sensors, and anti-counterfeiting fields owing to their outstanding optical properties. However, there remain challenges on lasing below 0 °C, which significantly limits the potential application of BPLC lasers in low-temperature environments. In this work, BPLC lasing below 0 °C is realized for the first time in a super-wide temperature range of -180-240 °C using a well-designed fully-polymerized BPLC system with a narrow line width of 0.0881 nm and a low lasing threshold of 37 nJ pulse-1. This fully-polymerized BPLC both effectively avoids low-temperature random crystallization and has excellent compatibility with dye molecules that significantly widen the lasing temperature range below 0 °C. Besides, the variations of laser peak and threshold are also revealed below 0 °C, that is, redshifted laser wavelength and increased threshold value with decreasing temperature, which contribute to a blue-shifted laser signal and a U-shaped lasing threshold in -180-240 °C. These unique laser behaviors can be ascribed to the temperature-dependent anisotropically microstructural deformation of the BP lattice. This work not only opens a door to the development of low-temperature BPLC lasers but also sets out important insights in the design of novel organic optical devices.

Michael Addition Inducing Self-Assembly to Construct Mechanochromic BP Film.

Liquid crystalline blue phase (BP) with 3D cubic nanostructure has attracted much interest in the fields of photonic crystals due to their unique optical properties and the ability to control the flow of light. However, there remains a challenge for simultaneously achieving self-assembly and mechanochromic response of soft 3D cubic nanostructures. Herein, a scalable strategy for the preparation of soft 3D cubic nanostructured films using oligomerization of the Michael addition reaction, which can induce the assembly of double-twisted cylinders for collective replication, remodeling, recombination, and growth, with a phase transition from BPII to BPI, and to chiral nematic phase, is presented. The prepared BP patterns can be obtained by Michael addition oligomerization reaction and composite mask photopolymerization, which present distinct mechanochromic sensitive due to patterns derived from different BP state, and the pattern can be reversibly erased and recurred by mechanical force and temperature. The average domain size of BPII prepared using this strategy can achieve 96 µm, which is 2.5 times larger than that obtained using the conventional cooling approach. This work provides new insights into the self-assembly and selective chemochromism of functional materials and devices.

Scalable Photochromic Film for Solar Heat and Daylight Management.

The adaptive control of sunlight through photochromic smart windows could have a huge impact on the energy efficiency and daylight comfort in buildings. However, the fabrication of inorganic nanoparticle and polymer composite photochromic films with a high contrast ratio and high transparency/low haze remains a challenge. Here, a solution method is presented for the in situ growth of copper-doped tungsten trioxide nanoparticles in polymethyl methacrylate, which allows a low-cost preparation of photochromic films with a high luminous transparency (luminous transmittance Tlum = 91%) and scalability (30 × 350 cm2 ). High modulation of visible light (ΔTlum = 73%) and solar heat (modulation of solar transmittance ΔTsol = 73%, modulation of solar heat gain coefficient ΔSHGC = 0.5) of the film improves the indoor daylight comfort and energy efficiency. Simulation results show that low-e windows with the photochromic film applied can greatly enhance the energy efficiency and daylight comfort. This photochromic film presents an attractive strategy for achieving more energy-efficient buildings and carbon neutrality to combat global climate change.

Correction: Intelligent antibacterial surface based on ionic liquid molecular brushes for bacterial killing and release.

Correction for 'Intelligent antibacterial surface based on ionic liquid molecular brushes for bacterial killing and release' by Lunqiang Jin et al., J. Mater. Chem. B, 2019, 7, 5520-5527, https://doi.org/10.1039/C9TB01199D.

Lysozyme-Immobilized Polyethersulfone Membranes with Satisfactory Hemocompatibility and High Enzyme Activity for Endotoxin Removal.

Endotoxin adsorption has received extensive attention in the field of blood purification. However, developing highly efficient endotoxin adsorbents with excellent hemocompatibility remains challenging. In this study, we propose a new approach for developing the functional polyethersulfone (PES) membrane to remove endotoxins. First, the PES polymer is grafted with polyethylene glycol methyl acrylate (PEG-MA) in a homogeneous phase system via γ irradiation, and PES-g-PEG can be directly used to prepare the membrane by the phase inversion method. Then, polydopamine (PDA) is coated as an adhesive layer onto a PES-g-PEG membrane in an alkaline aqueous solution, and lysozyme (Lyz) is covalently immobilized with PDA through the Schiff base reaction. Lysozyme acts as an affinity adsorption ligand of endotoxin through charge and hydrophobic action. Our study reveals that the PEG branched chain and the PDA coating on the PES membrane can maintain the secondary structure of lysozyme, and thus, the immobilized Lyz can maintain high activity. The adsorption capacity of endotoxins for the PES-g-PEG/PDA/Lyz membrane is 1.28 EU/mg, with an equilibrium adsorption time of 6 h. Therefore, the PES-g-PEG/PDA/Lyz membrane shows great potential application in the treatment of endotoxemia.

Ammonia mitigation campaign with smallholder farmers improves air quality while ensuring high cereal production.

Reducing cropland ammonia (NH3) emissions while improving air quality and food supply is a challenge, particularly in China where there are millions of smallholder farmers. We tested the effectiveness of a tailored nitrogen (N) management strategy applied to wheat-maize cropping systems in 'demonstration squares' across Quzhou County in the North China Plain. The N-management techniques included optimal N rates, deep fertilizer placement and application of urease inhibitors, implemented through cooperation between government, researchers, businesses and smallholders. Compared with conventional local smallholder practice, our NH3 mitigation campaign reduced NH3 volatilization from wheat and maize by 49% and 39%, and increased N-use efficiency by 28% and 40% and farmers' profitability by 25% and 19%, respectively, with no detriment to crop yields. County-wide atmospheric NH3 and fine particulate matter (with aerodynamic diameter <2.5 µm) concentrations decreased by 40% and 8%, respectively. County-wide net benefits were estimated at US$7.0 million. Our demonstration-square approach shows that cropland NH3 mitigation and improved air quality and farm profitability can be achieved simultaneously by coordinated actions at the county level.

An autofocusing method for dynamic surface-enhanced Raman spectroscopy detection realized by optimized hill-climbing algorithm with long time stable hotspots.

In the manual dynamic surface-enhanced Raman spectroscopy (D-SERS) detection process, it is difficult to focus on sample drop due to the constantly changing hotspot and easy judgment method. In this paper, we proposed an automatic focusing method based on long time stable hotspot with aid of optimization of hill-climbing algorithm and achieved on a designed device. First, set up a high temperature accelerating evaporation process to obtain hotspot and then cool to a low temperature rapidly to maintain it. Then, the spectral intensity was used as a focus of feedback signal in optimized hill-climbing algorithm to drive the sample stage to move up and down to adjust the depth of the laser on the samples to realize automatic focusing. As a result, the hotspot can be maintained for 5 min, and the autofocusing result can be achieved within 9 s, while the sensitivity was improved with two orders of magnitude in D-SERS detection of crystal violet (CV) compared with manual focusing.

Specific Clearance of Lipopolysaccharide from Blood Based on Peptide Bottlebrush Polymer for Sepsis Therapy.

Lipopolysaccharide (LPS) is the primary bacterial toxin that is vital to the pathogenesis and progression of sepsis associated with extremely high morbidity and mortality worldwide. However, specific clearance of LPS from circulating blood is highly challenging because of the structural complexity and its variation between/within bacterial species. Herein, a robust strategy based on phage display screening and hemocompatible peptide bottlebrush polymer design for specific clearance of targeted LPS from circulating blood is proposed. Using LPS extracted from Escherichia coli as an example, a novel peptide (HWKAVNWLKPWT) with high affinity (KD < 1.0 nм), specificity, and neutralization activity (95.9 ± 0.1%) against the targeted LPS is discovered via iterative affinity selection coupled with endotoxin detoxification screening. A hemocompatible bottlebrush polymer bearing the short peptide [poly(PEGMEA-co-PEP-1)] exhibits high LPS selectivity to reduce circulating LPS level from 2.63 ± 0.01 to 0.78 ± 0.05 EU mL-1 in sepsis rabbits via extracorporeal hemoperfusion (LPS clearance ratio > 70%), reversing the LPS-induced leukocytopenia and multiple organ damages significantly. This work provides a universal paradigm for developing a highly selective hemoadsorbent library fully covering the LPS family, which is promising to create a new era of precision medicine in sepsis therapy.

Capillary-Bridge Controlled Patterning of BTR:PC71 BM Bulk Heterojunction Micro Arrays towards High-Performance Photodetector.

The patterning strategy of organic semiconductors is a crucial issue for integrated circuit. However, due to the uncontrollable liquid dewetting, most of the research is mainly focused on the patterning of single component, few works have been done on the patterning of multi-component or heterojunction, which play an important role in optoelectronic devices. Therefore, a capillary-bridge strategy was introduced for patterning of bulk heterojunction (BHJ) micro-arrays, with liquid crystalline BTR and PC71 BM utilized as donor and acceptor, respectively. The BTR:PC71 BM arrays presented hierarchical morphology with suitable phase separation, which contributes to the efficient charge generation and transport. Moreover, the photodetector exhibited excellent performance with the light on/off ratio greater than 2000, the responsivity of 40.57 A W-1 , and specific detectivity of 2.15×1012  Jones. Such progress demonstrates that the capillary-bridge strategy is a promising approach for the fabrication of high-quality BHJ micropatterns arrays.

IgG1-Dominant Antibody Response Induced by Recombinant Trimeric SARS-CoV-2 Spike Protein with PIKA Adjuvant.

Recombinant trimeric SARS-CoV-2 Spike protein with PIKA (polyI:C) adjuvant induces potent and durable neutralizing antibodies that protect against multiple SARS-CoV-2 variants. The immunoglobulin subclasses of viral-specific antibodies remain unknown, as do their glycosylation status on Fc regions. In this study, we analyzed immunoglobulins adsorbed by plate-bound recombinant trimeric SARS-CoV-2 Spike protein from serum of Cynomolgus monkey immunized by recombinant trimeric SARS-CoV-2 Spike protein with PIKA (polyI:C) adjuvant. The results showed that IgG1 was the dominant IgG subclass as revealed by ion mobility mass spectrometry. The average percentage of Spike protein-specific IgG1 increased to 88.3% as compared to pre-immunization. Core fucosylation for Fc glycopeptide of Spike protein-specific IgG1 was found to be higher than 98%. These results indicate that a unique Th1-biased, IgG1-dominant antibody response was responsible for the effectiveness of PIKA (polyI:C) adjuvant. Vaccine-induced core-fucosylation of IgG1 Fc region may reduce incidence of severe COVID-19 disease associated with overstimulation of FCGR3A by afucosylated IgG1.

Mapping and assessing ecosystem services for sustainable policy and decision-making in Eritrea.

The mapping and assessment of ecosystems and their services (MAES) is key to inform sustainable policy and decision-making at national and sub-national levels. Responding to the paucity of research in sub-Saharan Africa, we conduct a pilot study for Eritrea that aims to map and assess the temporal dynamics of key ecosystems and their services. We reviewed policy and legal documents, analyzed land cover changes and estimated the potential for ecosystem services supply through an expert-based matrix approach. Our results showed that from 2015 to 2019, the potential supply of the ecosystem services analyzed (e.g., crop provisioning, water supply and recreation) increased, with the exception of wood supply. Overall, our study presents policy-relevant insights as to where to conserve, develop, or restore ecosystem services supply in Eritrea. Our approach is transferable to similar data scarce contexts and can thereby support policies toward more sustainable land development for people and nature.

Enhancing effects of 60Co irradiation on the extraction and activities of phenolic components in edible Citri Sarcodactylis Fructus.

In this study, the impact of 60Co-γ ray irradiation treatment on the content of active chemicals and their functions in Citri Sarcodactylis Fructus (CSF) was assessed. Scanning electron microscopy, Fourier transform infrared spectroscopy, and γ-ray diffraction revealed physical structure changes in CSF powder. According to the findings, the content of total flavonoids in the ethanol extract of CSF increased by 9.5%-21.62%, 7-hydroxycoumarin, hesperidin, 5,7-dimethoxycoumarin, and 5-methoxypsoralen increased by 5.31%-51.8%, 10.07%-99.81%, 6.6%-62.29%, and 3.03%-300%, respectively, when the irradiation dosage was raised, and the antibacterial, anti-inflammatory, antioxidant, and anticancer properties were all raised considerably. These results imply that the principal components and activity changes are proportional to the irradiation dosage. At present, the findings of this study serve as a reference for the use of irradiation technology in assisting extraction and enhancing the effects of functional foods.

Crop-specific ammonia volatilization rates and key influencing factors in the upland of China - A data synthesis.

Ammonia (NH3) is an important alkaline reactive nitrogen (Nr) species which is involved in global nitrogen (N) biogeochemical cycling, but which has negative impacts on the environment and human health. In order to better understand and control the NH3 loss potential in soil-upland crop systems in China, an integrated data analysis including 1302 observations from 236 published articles between 1980 and 2021 was conducted. The typical NH3 volatilization rate (AVR) and the main factors influencing AVR in the major Chinese upland crops (maize, wheat, openfield vegetables and greenhouse vegetables and others) were estimated and analyzed. The mean AVR for maize, wheat, openfield vegetables and greenhouse vegetables were 7.8%, 5.3%, 8.4% and 1.8%. The most important influencing factors were fertilizer placement, meteorological conditions (especially temperature and rainfall) and soil properties (especially SOM). Subsurface N application produced a significantly lower AVR compared to surface application. High N recovery efficiency and N agronomic efficiency were generally associated with low AVRs. In conclusion, high N application rates, inefficient application methods and the use of loss-prone N fertilizer types are the main factors responsible for high AVRs in major Chinese croplands.

Asymmetric Wettability Mediated Patterning of Single Crystalline Nematic Liquid Crystal and P-N Heterojunction Toward a Broadband Photodetector.

The well aligned and precise patterning of liquid crystals (LCs) are considered as two key challenges for large-scale and high-efficiency integrated optoelectronic devices. However, owing to the uncontrollable liquid flow and dewetting process in the conventional techniques, most of the reported research is mainly focused on simple sematic LCs, which are composed of terthiophenes or benzothieno[3, 2-b][1] benzothiophene backbone; only a few works are carried out on the complicated LCs. Herein, an efficient strategy was introduced to control the liquid flow and alignment of LCs and realized precise and high-quality patterning of A-π-D-π-A BTR, based on the asymmetric wettability interface. Through this strategy, the large-area and well-aligned BTR microwires array was fabricated, which exhibited highly ordered molecular packing and improved charge transport performance. Furthermore, the integration of BTR and PC71BM was achieved to manufacture uniform P-N heterojunction arrays, which still possessed highly ordered alignment of BTR. On the basis of these aligned heterojunction arrays, the high-performance photodetector exhibited an excellent responsivity of 27.56 A W-1 and a specific detectivity of 2.07 × 1012 Jones. This research not only provides an efficient strategy for the fabrication of aligned micropatterns of LCs but also gives a novel insight for the fabrication of high-quality micropatterns of the P-N heterojunction toward integrated optoelectronics.

Thermo-Induced Bathochromic Emission in Columnar Discotic Liquid Crystals Realized by Intramolecular Planarization.

Most organic thermochromic fluorescent materials exhibit thermo-induced hypsochromic emission due to the formation of excimers in ordered molecular solids; however, it is still a challenge to endow them with bathochromic emission despite its significance in making up the field of thermochromism. Here, a thermo-induced bathochromic emission in columnar discotic liquid crystals is reported realized by intramolecular planarization of the mesogenic fluorophores. A three-armed discotic molecule of dialkylamino-tricyanotristyrylbenzene was synthesized, which preferred to twist out of the core plane to accommodate ordered molecular stacking in hexagonal columnar mesophases, giving rise to bright green monomer emission. However, intramolecular planarization of the mesogenic fluorophores occurred in isotropic liquid increasing the conjugation length, and as a result led to thermo-induced bathochromic emission from green to yellow light. This work reports a new concept in the thermochromic field and provides a novel strategy to achieve fluorescence tuning from intramolecular actions.

Case Report: Parvovirus B19 infection complicated by hemophagocytic lymphohistiocytosis in a heart-lung transplant patient.

Immunosuppressed patients can contract parvovirus B19, and some may experience hemophagocytic lymphohistiocytosis (HLH). Herein, we describe the first report of hemophagocytic lymphohistiocytosis in a heart-lung transplant patient with concomitant parvovirus B19 infection. The patient was treated with intravenous immune globulin (IVIG) and the features of HLH were remission. This instance emphasizes the significance of parvovirus B19 monitoring in transplant patients with anemia; if HLH complicates the situation, IVIG may be an adequate remedy. Finally, a summary of the development in diagnosing and managing parvovirus B19 infection complicated by HLH is provided.